28
2013-10Tungsten plate, molybdenum plate, tungsten rod, tungsten crucible, molybdenum cr...
Molybdenum has many advantages, such as high melting point and boiling point, good high temperature strength, anti-friction and corrosion resistance, high thermal conductivity, small thermal expansion coefficient and goo...
28
2013-10Cutting of tantalum rods, tantalum tubes and tantalum processing parts
The melting point of tantalum is 2980℃, second only to tungsten (3380℃), and its density is 16.67 g/cm3. In annealing state, tantalum has good plasticity and is stable at high temperature. It can absorb and hold gas. Tan...
28
2013-10Molybdenum tube, tungsten plate, molybdenum rod, tungsten tube, molybdenum cruci...
Common tungsten-molybdenum alloys contain 30% ~ 50% tungsten by mass. Tungsten molybdenum alloy is prepared by the same method as metal molybdenum material and molybdenum alloy, that is, powder metallurgy sintering after...
28
2013-10Cutting essentials of niobium rod, niobium tube and niobium processed workpiece
In the cutting process, with the increase of temperature, oxygen and nitrogen are absorbed, which has a significant effect on the properties of niobium. Baoji Zhongpu provides: tantalum board, tantalum rod, tantalum tube...
28
2013-10Tungsten plate, tungsten rod, tungsten tube, molybdenum crucible application fie...
Tungsten is an important alloying element in steel industry, which can improve the strength, hardness and corrosion resistance of steel. Tungsten carbide (tungsten carbide), high hardness, wear, corrosion and heat resist...
28
2013-10Specializing in the production of molybdenum crucible, tungsten crucible, tungst...
Molybdenum rod, molybdenum crucible, tungsten and molybdenum sintered parts, tungsten and molybdenum forgings, molybdenum tube, tungsten tube, target, and tantalum, niobium, zirconium material processing parts, various v...
28
2013-10Us July Markit manufacturing purchasing managers index
Economists on average had expected a gain of 52.8, according to a Bloomberg survey. The June flash PMI came in at 52.2 points.
28
2013-10Application of molybdenum and molybdenum materials in petrochemical industry
The density of molybdenum is 10.2 g/cc. Melting point is 2610 ℃. The boiling point of 5560 ℃. Molybdenum powder is pressed into green billet by isostatic pressure and sintered at about 2100 ℃, and hot processed at 870 ~ ...
28
2013-10Application of molybdenum plate, tube and rod in glass industry
It has small expansion coefficient, high conductivity and good thermal conductivity. It does not react with hydrochloric acid, hydrofluoric acid and alkali solution at room temperature, but only dissolves in nitric acid,...
28
2013-10Tantalum rod, tantalum board, tantalum tube
The texture of tantalum is very hard, tungsten plate, molybdenum plate, tungsten rod, molybdenum rod, tungsten tube, molybdenum tube, tungsten crucible, molybdenum crucible hardness can reach 6-6.5. Its melting point is ...
28
2013-10Tungsten plate, tungsten rod, tungsten tube, tungsten crucible, military applica...
Alloys of tungsten and other refractory metals (tantalum, niobium, molybdenum, rhenium) are used as thermally strong materials in aerospace and rocket technology, as well as in other sectors that require high thermal str...
28
2013-10Use of niobium plate, niobium rod and niobium tube
With high temperature resistance, good strength and stiffness, tantalum is a high quality material for making heating parts, heat insulation parts and charging vessels for vacuum high temperature furnaces, and for making...
09
2021-12Determination and treatment of leakage in titanium heat exchanger
Titanium heat exchanger using time is long will gradually appear some problems, common problem is the equipment of leakage and leakage problems such as equipment, facing different problems need to adopt the right method ...
09
2021-12Titanium alloy + thin-walled workpiece, how to solve the difficult processing pr...
When titanium alloy meets thin-wall parts, it seems to be twice as difficult to process 2mm thin-wall from the recognized difficult material. However, after specific analysis, there can be corresponding solutions: The an...
09
2021-12Performance and application of TC4 titanium alloy material
Greater than the intensity. The strength of TC4 sb=1.012GPa, density G =4.4*103, specific strength sb/g=23.5, while the specific strength sb/g of alloy steel is less than 18. Titanium alloys have low thermal conductivity...
09
2021-12What are the precautions for grinding titanium alloy rod and TC4 titanium alloy?
Due to the tendency of titanium alloy material to fill grinding wheel, it brings difficulties to the grinding of titanium alloy rod and TC4 titanium alloy. During grinding, the higher temperature rise generated on the in...
